Product features:
1. The castings are all made of HT300 cast iron, quenching and aging treatment, the overall stability of the machine tool, high strength, stable and reliable precision.
2. The spindle system is imported from Taiwan's professional supporting manufacturers, and the world-renowned brand NSK spindle special bearings are used. The whole spindle has a long service life and high accuracy.
3. The ball screws of X.Y.Z three-axis transmission adopt Taiwan brand double nut pre-tightened ball screws, high-precision grinding ball screws, and double nuts automatically eliminate backlash.
4. X.Y.Z three-axis rails adopt Taiwan brand P-level roller guides to ensure the accuracy of machine tool movement.
5. The lubrication system adopts timing and quantitative automatic centralized lubrication to ensure that the lubrication part is fully lubricated.
6. Use Taiwanese disc type BT40 24 tool magazine, shortest path tool selection control and tool holder pre-turning control, fast and efficient.
7. The fourth axis of rotation is optional, and the fourth axis adopts a roller cam structure to ensure the accuracy of division.
Technical parameters:
| project |
project |
specification |
unit |
| stroke |
X axis (left and right stroke) |
800 |
mm |
| Y axis (forward and backward stroke) |
500 |
mm |
| Z axis (up and down stroke) |
500 |
mm |
| Distance from spindle center to column guide rail |
590 |
mm |
| Distance from spindle end to worktable |
120-620 |
mm |
| Workbench |
Work table size |
1000×500 |
mm |
| T-slot (number × size × spacing) |
5×18×80 |
mm |
| Maximum weight of worktable |
800 |
kg |
| Spindle |
Spindle taper hole (model/installation size) |
BT40 |
|
| Spindle speed |
8000Belt type |
rpm |
| Motor |
Spindle motor |
7.5-11 |
KW |
| X axis motor |
3 |
KW |
| Y axis motor |
3 |
KW |
| Z axis motor |
5.9 |
KW |
| Tool library |
specification |
BT40 |
- |
| Number of tools |
24 |
Put |
| Number of tools |
Knife arm |
- |
| Tool change time |
1.5 |
s |
| Maximum tool diameter (full tool / adjacent empty tool) |
78/120 |
mm |
| Maximum tool length |
300 |
mm |
| Tool weight |
8 |
Kg |
| Feed rate |
Maximum cutting feed rate of three axes |
16 |
m/min |
| Three axis rapid movement |
36 |
m/min |
| Precision |
positioning accuracy |
±0.005/300 |
mm |
| Repeatability |
±0.005/300 |
mm |
| Machine specifications |
Bed weight |
5000 |
Kg |
| Machine floor size (length×width×height) |
2600×2200×2800 |
mm |
| rated power |
30 |
KW |
| Remarks: Due to the continuous improvement of equipment technology, we reserve the right to change the technical parameters at any time without prior notice. |
Standard configuration:
| Accessory name |
Origin |
Brand |
specification |
Remarks |
| Bed light machine |
Domestic |
|
HT300 |
|
| CNC system |
Taiwan |
New generation |
22MA(Four in one) |
Optional:Mitsubishi |
| Servo drive |
Taiwan |
New generation |
|
Optional:Mitsubishi |
| XY axis servo motor |
Taiwan |
New generation |
3KW |
Optional:Mitsubishi |
| Z axis servo motor |
Taiwan |
New generation |
5.9KWWith brake |
Optional:Mitsubishi |
| Spindle |
Taiwan |
Kin Chun/TD |
BT40-140-8000 |
Belt type |
| Spindle motor |
Taiwan |
New generation |
7.5-11KW |
Optional:Mitsubishi |
| Bearing |
Japan |
NSK |
P |
|
| Linear Guides |
Taiwan |
Shanghai Bank/Intime |
MSA35 |
Roller |
| Ball screw rod |
Taiwan |
Shanghai Bank/Intime |
R3516 |
|
| Coupling |
Domestic |
Domestic high quality |
|
|
| Heat exchanger |
Domestic |
Ryogi |
|
|
| Automatic lubrication |
Taiwan |
Proton/Shengxiang |
Volumetric |
|
| Tool library |
Taiwan/td> |
Okada/Shengjie |
Disc type |
|
| working lamp |
Domestic |
LED |
|
|
| transformer |
Domestic |
Domestic high quality |
|
|
| Contactor |
France |
Schneider |
|
|
| breaker |
France |
Schneider |
|
|
| Three-color warning light |
Domestic |
Domestic high quality |
|
|
| Note: According to the delivery cycle, the manufacturer has the right to change the purchased parts of the same quality without affecting the performance of the machine tool. |
Random attachment:
| category |
No. |
specification |
Quantity |
| Random accessories |
1 |
Lock knife holder and knife handle |
1个 |
| |
2 |
Horn |
Several |
| |
3 |
Toolbox |
1BOX |
| random document |
1 |
Qualification |
1serving |
| |
2 |
Packing List |
1serving |
| |
3 |
System Operation Manual |
1serving |
| |
4 |
System Programming Manual |
1serving |
